GW Contrast Paints & my ECW Collection/More Deliveries

/

Squadpainter, in his kind comment yesterday, asked which GW Contrast paints I used when painting my 15mm ECW collection. That sounds like a good excuse for a post, so here’s a list of what I used…

Undercoat: I favour the Grey Seer over the Wraithbone only because I don’t think you get as much show-through on the weaker colours, but I use either dependent on supplies! It’s expensive compared to the car primers from Halfords that I used to use, but does take the Contrast Paints superbly. Pay the extra: it’s worth it.

Note that Contrast Paints are not actually paints, but more glazes. This means that they are comparatively fragile and painted figures really do need a coat of varnish before hitting the table.

Skintones: There are three fleshtones in the range, I use Darkoath Flesh for caucasian skin.

Uniforms & Hats

I used colours from across the entire range. Some of my units are in bright, fancy uniforms; some use more muted colours.

The buttons at the back are not separately painted: it’s how the Contrast Paint works.

I found the best red to use was Fleshtearers Red; I found the worst green was Militarum Green. Creed Camo is a nice green; and all the greys and blues are lovely. Nazdreg Yellow is a surprising choice, but works very well.

I never really got on with Apothecary White: I generally ended up having to drybrush a standard acrylic white over an Apothecary White to get the effect I wanted. I do know that Apothecary White works really well for larger figures, so maybe it’s just the way I paint 15s that is the problem.

Hodder Grey: the uniform coats of my Scots Covenantors are nearly all Space Wolves Grey, with Ultramarine Blue bonnets. Trousers etc differ.

Note the jerkins

Note the jerkins

Jerkins: Aggaros Dunes makes a great colour for the ubiquitous, sleeveless leather jerkin.

Smocks & Leggings: Skeleton Horde makes a good off-white colour for faded linens.

Boots & Shoes: all are Wyldwood.

Equipment

All wood: I use Goregrunta Fur for anything wooden. Pike handles, muskets, limbers etc.

All leather: Snakebite Leather.

Horses

I have two types of standard brown horse. Both use Cygor Brown diluted 50/50 with Technical Contrast Medium. One type of standard brown horse then gets the legs up to the knee, mane and tail painted black; the other just has the mane and tail painted black, with an odd number of standard acrylic white socks and a standard acrylic white star or blaze on the forehead.

DSCN1203.jpg

Black horses use Black Templar, with a standard acrylic black mane and tail, and then an uneven number of standard acrylic white socks and a standard acrylic white star or blaze on the forehead. Be warned, Black Templar is fairly fragile, and will easily be scraped off, so a little care when handling painted-but-not-yet-varnished horses is required.

Dun horses can be achieved with Aggaras Dunes, with legs up to the knee, mane and tail painted black.

Just make sure they aren’t wearing jerkins!

Just make sure they aren’t wearing jerkins!

Hopefully that will give you a head start on which colours to use.

More Deliveries

The story so far: a load of lockdown loot ordered from eight different manufacturers/suppliers last Sunday. On Wednesday, Boontown won the race to be the first to deliver, and on Thursday the ever-reliable Warbases came in second.

Today we can add three more to the list. Yesterday Magister Militum delivered me some more ECW figures from their Hallmark range; and today we have a tie for 4th place with a re-stock in paints from Games Workshop, and the raw lead for my new Classical Indian army from Museum Miniatures.

Not mine: picture from the Museum Miniatures website. Now that I have seen them in the lead, I can confirm that they are truly lovely figures.

So far, therefore, we have:

1. Boontown (3 days)

2. Warbases (4 days)

3. Magister Militum (5 days)

4= Games Workshop (6 days)

4= Museum Miniatures (6 days)

Still pretty impressive stuff!

More Scottish Pike/Warbases Deliver!

/

Here’s another unit for my 15mm ECW Scots Covenanter army: a second pike-only battalia.

The fine-looking pikemen are from the Hallmark range via Magister Militum; and the command figures are Peter Pig. These are painted mainly with GW Contrast Paints, with just the metalwork being normal acrylics.

As regards everything else, the flag is a custom order from Maverick, the pikes are from Northstar, the heather is from Boontown (see yesterday’s post for more) , the base is from Warbases (see below for more), and the flock is from Hobby Round.

Warbases Deliver!

The story so far: a load of lockdown loot ordered from eight different manufacturers/suppliers last Sunday. On Wednesday, Boontown won the race to be the first to deliver, and yesterday the ever-reliable Warbases came in second with my order of vehicle bases (which I use for 15mm elements such as the pike, above) and a packet of command bases.

So far, therefore, we have:

  1. Boontown (3 days)

  2. Warbases (4 days)

Pretty impressive stuff!

Scottish Lancers

/

I’ve finally had a chance to finish a unit that’s been sitting on the painting table for almost a week: a unit of Scottish Lancers for my ECW Covenantor army.

The main body figures are from Khurasan’s ECW Scots & Irish range, painted mainly with GW Contrast Paints. The two command figures are Peter Pig. The flag is a custom design from Maverick. As I didn’t have a command figure holding a flag, and wrapping it around one of the lancers looked weird, I decided to have the chap on the left waving a cut-down version!

The unit is based for For King & Parliament on a Warbases vehicle base. The purple heather is from Boontown.

I also managed to paint up a Colonel’s command base for the troops: a couple of figures from Peter Pig:

These were painted in the same way as the Lancers, above.

Pike Only Battalia

/

To round out my ECW forces, I thought I’d better have some pike-only battalia and, as my Scots need a bit of a boost, I thought I’d make them Scottish.

scot1.JPG

The main body of the unit is pikemen from Hallmark Figures via Magister Militum. The three command chaps are from Peter Pig. They are painted mostly with GW Contrast paints, and mounted as a For King & Parliament element on a “vehicle base” from Warbases. The pikes are from North Star, the flag is a custom order from Maverick, and the heather is from Boontown.

scot2.JPG

More Dutch Horse

/

This weekend I finally had the chance to get back to the painting table and polish off another unit of “Dutch” horse for my 15mm ECW collection.

The figures are Hallmark from Magister Militum, painted with GW Contrast Paints.

As with all my ECW figures, I mounted them as a For King & Parliament element on a Warbases Vehicle Base. They are lovely and chunky to move around the tabletop, but I am somewhat terrified of dropping one!

Whilst I was waiting for the paint to dry between colours on the above, I also managed to paint a command base for my Scots Covenantor force. Here I used the Peter Pig special Scots pack of ensign, preacher and dog and a Hallmark gentleman command figure.

I must remember to brush off the spider’s web before photographing!

These came out quite well, and I do love the preacher. One thing I must remember to do, however, is to brush off the bits of errant spider’s web that the varnish picks up when I’m spraying in the garage before photographing the figures. It comes off easily, but you can barely see it in normal light…or at least that’s my excuse.

Onto some pike-only units now.

Scots Covenantor Artillery

/

Another unit for my ECW Scots Covenantor army: this time it’s the artillery.

These are figures from Khurasan Miniatures’ 15mm Scots & Irish range, with one man per crew coming from Peter Pig.

They are painted with GW Contrast Paints, and mounted on a vehicle base from Warbases. The “heather” comes from Boontown.

DSCN1999.JPG

More Scots

/

A very productive weekend with another two units of Scots for my ECW collection rolling off the production line. All the below are 15mm figures from Khurasan’s Scots & Irish for the ECW range, painted with GW Contrast Paints and mounted on Warbases vehicle bases to give a nice chunky element for For King & Parliament.

First up was the third unit of Highlanders:

High2.JPG

Following the Highlanders was a suitably manky unit of mounted Scottish Pistoliers. In FK&P , Scottish horse are nearly always downgraded due to the poor quality of their steeds.

My name is Connor MacLeod of the Clan MacCleod...

/

Now that the three battalia of Scottish pikemen are done, it’s time to start adding the Highlanders

These are, again, 15mm Khurasan Miniatures mostly painted with GW Contrast paints and mounted on my chosen element bases from Warbases.

I used 16 figures to represent the Highlander unit equivalent of a pike ‘n’ shot battalia. That might be a little light, but with the dynamic poses you can see in the pic above, any more would have had them on top of each other. It looks about right on the tabletop though.

Note that the chaps with the polearms and yellow shirts are “humblies”: called that because they are the poorer sort of Highlander!

Scottish Pikes

/

Here’s another battalia of lowland Scottish pikemen for my English Civil War collection:

The figures are from Khurasan’s Irish/Scottish ECW range. They are 15mm and size nicely with the Peter Pig and Hallmark (from Magister Militum) ranges that I am already using. They are very cleanly sculpted and an absolute pleasure to paint. Those of you in the UK might be interested to note that they arrived with me only five days after ordering them from the US: the GZG teleport device is obviously now working in both directions!

They are painted mainly with GW Contrast paints and are mounted on a Warbases vehicle base, giving a very nicely sized element for use with the For King & Parliament ruleset. The flowers/heather is from Boontown.

I’ve taken a pragmatic approach to painting tartan. Rather than spend hours and hours trying to actually reproduce a genuine tartan pattern, I’ve made do with something that doesn’t take too long and looks good at a wargames distance of three feet or so. In effect, all I did was add stripes of a different colour to a heavily shaded sash. This worked for these guys, but the highlanders that I’m currently painting need a little more work as they have a lot more tartan, but more on that in a later post.

Another Scots Battalia

/

Enthused by how the first Scots battalia came out, I leapt into painting the second one and polished it off in no time at all.

As a reminder, these are Khurasan Miniatures’ 15mm English Civil War Scots infantry: a mixture of their pikemen, musketeers and infantry command packs. They were painted using GW Contrast Paints, and mounted on a Warbases Vehicle base. The purple heather is from Boontown.

When I first started the Scots, I was a bit worried about painting tartan, but I seem to have found a way of getting the various sashes looking at least tartan-esque, certainly from usual wargaming distance. To be honest, all I did was paint each sash a basecoat red, then drew lines of various different colours (mainly green) against the grain of the sash. I think they have come out quite well, but the real test will be when I move on to the Highlanders!

DSCN1858.JPG

There will now be a short interval whilst I paint the one remaining legionary unit I need to actually field the Marian Romans…

The First of the ECW Scots

/

I still needed some more foot for my ECW armies, but was a little bored of painting up another straight pike and shot battalia (I have seven units of about 26 figures each, or 182 foot figures) so decided I’d add a Scots element.

Most of my ECW figures so far have been Peter Pig or Hallmark (via Magister Militum), so I decided to look elsewhere for the Scots: two changes presumably being as good as two rests!

The figures I settled on in the end were Khurasan’s fairly new range of ECW Scots and Irish. I must admit I was strongly influenced by how good the painted up examples on the website looked (other manufacturers take note!) and the fact that I could send a message via FB to check if the pikemen were open handed (they are) and get a response within a couple of hours.

Even more impressive was that after I’d ordered my usual fairly large amount (three foot battalia, three horse units, two units of Highlanders, and a couple of artillery pieces) the figures arrived from the US only five days later. Five days!

This meant they headed straight to the front of the painting queue, so here’s the first battalia finished:

What I like about these figures is the obvious contrast with the English battalia: all dressed very plainly as compared to the bright colours down South…but with several of the figures having tartan sashes just to liven things up a little.

These paint up very easily (as usual, I mostly used Contrast Paints) and are highly recommended.

A Few Odds & Ends from the Painting Table

/

Very busy at work this last week, so only time to complete a few odds and ends for the two projects I’m currently working on: English Civil War and Marian Romans.

I always find that having two projects on the go at any one time is better than having just one. If, like I do, you only collect in one scale (15mm for me) I also find that it’s best to use different manufacturers as well: alleviates the boredom factor.

First up, a couple of command stands for my English Civil War armies. Here I’ve used a couple of gentleman officers from Hallmark (via Magister Militum) as a random Colonel-type, and then a couple of spare figures from Peter Pig - one command, one artilleryman - as a Colonel of artillery. The mini-gabions are Hama beads filled with basing material!

The Hallmark figures are really exquisite and, if you use Contrast Paints like I do, really easy to paint.

On top of the above, I’ve now painted up the five Hero figures I need for my Marian Roman army. Representing Heroes is always difficult, as you need a figure that stands out a bit and yet is not being used for the rest of the army.

What I chose to do was to add a set of Peter Pig Centurion figures to my Baueda Marian Roman army.

One of the great things about Peter Pig (in addition to the huge range and lovely, very paintable sculpts that they do) is that you can ask them to give you a custom built pack of just one sculpt. So here I looked at one of their mixed command packs, chose one figure, and had a pack of eight of just that figure sent to me. Very handy indeed.

Siege Guns

/

Having equipped my ECW armies with light guns and field artillery, it was time to add the big boys: a couple of Siege Gun elements.

The guns themselves were no problem: many years ago I was at an English Heritage site (or similar) and came across a tub of artillery models that have, over the years, proved ideal for siege gun-sized artillery pieces. I still have a handful left, so two of them would form the centrepiece of the elements.

I wanted the siege gun elements to look immobile, so rather than having the guns “naked” on a base, I bought a couple of resin gabion pieces from Peter Pig to serve as dressing. This also meant I didn’t have to have any sort of limber and team in the vicinity: they always take ages to do!

The crews initially came from Peter Pig, who do six different poses. Six men per gun didn’t seem enough, however, so I added a couple of Hallmark officer/sergeant types to each to bulk things out. Hallmark (available through Magister Militum) and Peter Pig size very well together.

I then discovered that the guns, gabions and crews didn’t really fit depth-wise on the standard element bases I’m using for my ECW troops. My standard bases are Warbases Vehicle Bases that fit up to about thirty foot or half as many horse figures without difficulty, and sit very nicely on my FK&P grided battlemat…but the combination of crew, gun and gabion stuck out over the end. Fortunately Warbases were able to supply customised “double depth” vehicle bases that exactly did the trick. I can even use the spares I ordered for TTS camps.

So that’s two siege gun elements now completed. More Romans on the way…

More ECW Dutch Horse

/

Having painted up three units of Republican Romans, I needed a break from things Latin, so dipped into one of the more recent outcrops from the lead mountain: another unit of Dutch horse for my English Civil War collection.

These are more from the excellent 15mm Hallmark range, available from Magister Militum. They are painted with GW Contrast Paints, with the flag from Maverick. The base is a large vehicle base from Warbases.

ECW Artillery Bases

/

Managed to find time to paint up a couple of ECW artillery bases for For King & Parliament. Guns and figures are all 15mm from Peter Pig and, as usual, they’re painted with GW Contrast Paints.

These have come out quite nicely, and will form the centrepiece of the next scenario in my fictional North Wessex campaign.

Here there be Dragoons!

/

More for my ECW armies: a unit of Dragoons.

In For King & Parliament, my chosen ruleset for the period, Dragoons are small unit compared to a standard infantry battalia: effectively a cavalry unit dismounted less a few chaps to hold the horses. I’ve already decided a Forlorn Hope as being eight figures strong, so given your standard battalia is 24 figures strong, the Dragoons are somewhere in the middle at 12 figures strong.

I’m not actually going to paint up mounted versions or horse-holders because, as I understand it, there was only one encounter where Dragoons fought mounted, so best to avoid ahistorical fielding by not having any on horseback. That’s my excuse anyway!

These are 15mm Peter Pig figures painted (quickly) with GW Contrast Paints. Note the chap next to the purple flower in the picture above. He’s a good example of something you have to watch out for with Contrast Paints: missing a bit! Because the paints flow like a wash, it’s often easy to forget to use a proper brush (i.e. not a wash brush) and work the paint into the relief (the creases) in a figure. If you just dab the paint on like a wash, sometimes it will run away from where you’ve dabbed it a few seconds after you’ve done the dabbing, which if you’re painting multiple figures on a lolly-stick can mean that you miss what’s happened because you’ve moved on to the next figure. I shall have to re-open the box and fix him!

Incidentally, I had started thinking that I’ll never finish this English Civil War project, but then I realised that the reason it was taking me so long to complete, the reason why I had painted so many figures compared to other armies, was that I was painting enough of the same sort of figure (as the sides are relatively homogeneous) for to field both sides in a game…so painting two armies or one double-sized army. Doh!

Finally, today, regular visitors will know that I’ve set myself a task of interspersing my new project painting with clearing some of my rather sizable lead mountain. Here’s what I did - to do my duty! - just before painting the Dragoons:

It’s one of those objective markers the size of a Battlefront large base. Don’t know why I had it, or what I’ll use it for, but that (tiny) corner of the lead mountain is now flattened!

More for the ECW Collection

/

Lockdown does definitely mean more time for painting, and I’m adding units to the 15mm ECW collection almost as fast as I can buy the raw lead!

Today’s offering consists of two parts.

First up is a standard infantry battalia but, for the first time, with the figures from Hallmark rather than Peter Pig:

These were actually easier to paint than Peter Pig: they are very un-fussy figures, with everything that needs to be painted clearly defined. As per usual, I used GW Contrast Paints, apart from the metalwork, painting eight figures of the same type at the same time.

I like to swap between ranges, provided the sizes match: a change is as good as a rest, as they say.

I like the way the Contrast red has left all the buttons a much lighter shade than the surrounding cloth: I can’t imagine what it would be like to hand-finish every one. Well, I can actually: very tedious!

Next up is a few of the offs and ends that you need to play the game itself: two Light Gun markers and one officer (a Colonel). I haven’t positioned the officer figure very well in the photograph: you can only see half his profile!

The gun markers are Peter Pig; the officer himself is from Hallmark, with his mounted flag bearer from Essex.

Dun Coloured Dutch Horse

/

As regular visitors will know, I’m trying to take advantage of the extra painting time available during lockdown by interspersing my main projects with clearing a bit of the lead mountain.

After having completed the platoon of Hawkmen from The Scene, who had been perched on the lead mountain’s upper slopes for some time (see post last Friday), it was time to get back to my English Civil War armies with another unit of Dutch-style horse.

Like the last unit painted, these are 15mm Hallmark figures from Magister Militum: a close match in size to the Peter Pig figures which, so far, have formed the bulk of the collection.

I decided to try and paint dun-coloured horses this time: using the GW Contrast Aggaros Dunes colour straight from the bottle and then blacking the legs, manes and tails. It seems to have worked quite well, turning out a bay dun or buckskin dun colour.

As an experiment, I also undercoated in the ‘official’ grey undercoat as opposed to the usual white. That worked quite well, as the grey doesn’t show through so much if you miss a bit. Didn’t really notice much difference to the colours though.

One thing I did notice, however, was that the Contrast Black colour is quite fragile i.e. the least scrape across the tails would take some of it off, leaving said undercoat showing through on the most raised bits. In the end I gave each horse a quick stroke of normal black paint straight down the tail which solved the problem. A pity, though, as the hair on dun coloured horses is rarely pure black: it tends to have medium dark brown strands as well, and the pure Contrast black simulated a non-block-black quite well.

The rest of the figures were also painted with Contrast Paints, except for the sleeves in white. I had to use normal acrylic white over the grey undercoat as the Contrast white didn’t really do anything: just came out a bit dingy. Contrast white over Warithbone white in future, I think.

Right, with another “main project” unit done, off to the lead mountain to see what I can find to paint up next.

More Painting

/

Not commuting every day has certainly increased my painting output, so it was time to start a project that’s been on my mind since before Christmas.

Regular visitors will know that I play the Ancients game To The Strongest using 15mm figures on a 15cm grid. This way, I can use the armies that I originally put together for Vis Bellica on 6cm frontages by using two VB units for one TTS unit. This has meant a lot of investment in my old VB armies: effectively doubling the size of each or, where “deep” units such as Hoplites and Warbands are concerned, quadrupling the number of bases needed.

One of the last armies to need the TTS expansion treatment is my 100YW English army: knights, longbows and billmen. The trick here was going to be matching the figures and paint schemes that I had used before.

Figures weren’t so much of a problem…once, that is, I’d remembered (i.e. searched the Internet until I got a match) that I’d used Museum Miniatures for the core of the VB army. Paints would have to be as close as I could get with the originals using Contrast Paints.

Here’s the first two contributions: a command stand and an element of longbows:

I also managed to find time to complete a second unit of Commanded Shot for my ECW armies. As with the other, these were Peter Pig figures in 15mm.

I’ve also just had another delivery of Hallmark figures so (once the wife has wiped the package down with Dettol!) it’ll be on to more Dutch Horse.